Fault Codes

Reference

Find a fault or alarm by brand, code or symptom. Match the model and controller before using a result. Chiller and DX plant references include displayed alarm names and controller templates. Use the source edition and installed options shown on each result.

Controller manuals — links to manufacturer documents · Published controller access

Search
Manufacturer

Same code, different meaning? Select the family on the equipment nameplate. Coverage is limited to the references shown.

0 codes
Controller access — published manufacturer references

Find the published access value for the matching controller and document edition. These values may have been changed on site. Use only for authorised work; menu access does not authorise changing plant protections.

On the cited Daikin MicroTech III manual, basic status and active alarms can be viewed without a password. Local user and maintenance menus are separate from the embedded web-interface login.

Basis, sources and scope
This is a starting reference, not a complete code library. Plant additions were checked on 8 October 2026. Earlier entries retain their own reference dates; a new release does not revalidate those meanings. Existing entries without a row link have not been rechecked in this expansion. Codes are model-family specific — a code one family uses may be unused or have a different meaning on another. Always read the code on the unit, then confirm against that unit's manual and the equipment nameplate.
  • Scope: the brands and families listed in the filters. Reviewed coverage includes Daikin SM-TS3 (with per-code range markers), Mitsubishi Electric Mr Slim tables for the named models, Mitsubishi Heavy Industries PAC/KX tables from the 2017 handbook, Panasonic H/F codes, ActronAir Classic, Aurora and Advance, and Temperzone UC8 air-to-air software 2.1.9. A general brand reference does not establish compatibility with every model.
  • Identifiers include display codes, alarm names and controller templates. The brief notes are orientation for a technician, not a complete diagnostic procedure. An identifier does not prove refrigerant charge or identify a part to replace. Record it before resetting and follow the exact unit manual.
  • Not a compliance or safety check. A2L / flammable refrigerants, pressure equipment and electrical work must follow the relevant code and the equipment manual. This tool is a starting reference only.
  • Disclaimer in the tool. If a code’s meaning is uncertain, confirm the exact unit manual and ask your qualified supervisor or the manufacturer. The Technical AI Assistant can help organise questions; it is not a licensed technician or a substitute for on-site supervision.
NOTES: Codes differ between model families and firmware revisions — never rely on this reference alone. Verify the displayed code in the unit's own installation/service manual. Probe-fault causes are typically a sensor open/short or a wiring/connection fault; temp-alarm causes are often a stuck door, poor airflow, a refrigerant issue or a faulty probe — but always diagnose before replacing parts.

Sources (accessed 2026-09-07): Dixell — XR60CX manual & XR03CX manual (alarm table). Carel — Carel ir33 user manual & Carel PJEZ alarm table. Danfoss — Danfoss EKC 202D/302D data sheet & EKC 201/301. Phasefale — Phasefale TACmk2 installation/operation guide (publisher revision November 2020; link checked 8 Oct 2026; confirm exact model/firmware). Daikin, Mitsubishi Electric and Mitsubishi Heavy Industries — use the manufacturer PDF links on each reviewed entry (checked 2026-09-10). Fujitsu — Fujitsu General error-code list. Panasonic — Panasonic self-diagnosis H-code table. Gree — Gree Comfort error-code guide & Gree U-Match service manual. Actron Air — ActronAir error-code FAQ. Temperzone — Temperzone UC8 fault-code table. Verify against the current manual for your exact unit.